HON-1
Pro Tips!!!
-Make sure all tires are inflated to door placard suggested.
-Be sure ALL other sensors are out of range of vehicle antenna, (10 ft range min).
-Disable all other WiFi/Bluetooth and electronic accessory devices**.
– After relearn procedure is complete the TPMS lettering may remain on the dashboard, the vehicle will need to be driven to complete process.
**Includes HID kits, car audio systems, navigation, back-up cameras, if NOT original equipment, these devices may cause RF disruption.
A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
- Inflate all tires
- Read all sensor IDs using tool
- Connect tool to OBDII port
- Reset ECU with tool
- Drive for at least 5 minutes at 28mph
TIA Troubleshooting tip: For model year 2008 plus on the Civic, Fit, and Odyssey (non-touring): In some cases, the MIL will cease to flash after full deflation/inflation, drive vehicle 1-10 miles to get MIL to stop flashing if it does not after deflation/inflation.